hello my clutch has stopped working on the troublesome 90 . lets start with i got a flat pedal but the master cylinder is full. I took the slave off the flywheel housing and it seems to me that the fork is jamned.how could this of happened thats why i got no pressure on the clutch because the push rod is not really touching any thing. Could it be the throw out bearing knarcked i dont know any suggestions before i pull the gear box would be appreciated thanks
clutch problems
- Thread starter bobbydog
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Landy-ads
Active Member
- Posts
- 407
- Location
- Out the front, spanner in hand
Clutch fork given up.:doh: Very common. Replace with new heavy duty one.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Get a torch and have a peep in the slave cylinder hole. and see if ya can spot owt wrong. But it does sound like an holed clutch fork.
Dent
New Member
- Posts
- 1,051
- Location
- North shropshire
It's where the fork pivots on the ball that wears through , not the pushrod.
Similar threads
