Clutch pipe routing

Please could someone with a LT77 gearbox and a RHD vehicle take some photos of the clutch pipe routing across the bulkhead and down the passenger footwell to the flexi pipe for the slave?

I know this is the route it takes but I have nothing to reference where it should secure or the exact route required to avoid getting in the way of other bulkhead attachments (wiring etc). Currently I have a bare bulkhead, everything on my old bulkhead had melted so have no reference, and the "donor" bulkhead was a 300tdi so had the R380 box with the slave on the drivers side.

Hope these help:

Beneagles said:

Hope these help:

View attachment 270152

View attachment 270153

Click to expand...

Excellent many thanks. That is a lot of help. What is the cover/box in the centre of the bulkhead the pipe runs behind?

Also difficult to make out on the pic what is used to secure the pipe to the bulkhead.

dag019 said:

Excellent many thanks. That is a lot of help. What is the cover/box in the centre of the bulkhead the pipe runs behind?

Also difficult to make out on the pic what is used to secure the pipe to the bulkhead.

Click to expand...

No idea! That particular landy departed 8 years ago...so can't run out and check. This pic doesn't make it any clearer either. Sorry



Any kind or propriety pipe clip should do: this style would be my choice:
https://www.ebay.co.uk/itm/265011214662?chn=ps&_trkparms=ispr=1&amdata=enc:1iwF79dExRZWLX63dr8LUvg63&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=265011214662&targetid=1647205089800&device=c&mktype=pla&googleloc=20342&poi=&campaignid=17819795917&mkgroupid=137883623263&rlsatarget=pla-1647205089800&abcId=9301024&merchantid=138821014&gclid=Cj0KCQjwof6WBhD4ARIsAOi65aipkV_9GbMnvgs-eKY1XW_YniywMZ87nFzU1E-LMUSoSb9su6ZweMcaAvuCEALw_wcB

Well my clutch pipe is now routed many thanks for the reference pics above. I just need to work out what the best way to secure it to the underside of the bulkhead is. Anyone able to give me any ideas what the cord t method is, I assume you get little plastic clips similar to brake/fuel chassis clips?