Clutch pedal swap?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

burki

Member
Posts
11
Location
hertfordshire
Hi all,
I have a 200dti, which has the broad clutch pedal arm, without the notch which houses upgraded spring mod. Can i change the old, "wider arm" for a newer "thinner arm" with the notch?
What bits would i have to change and from which model would they come? Is it an easy job etc.
Any help and experiences welcome.
Many thanks
 
I recently bought one on eBay that had come from a tdci with the master cylinder and spring attached for about 35 quid. Unbolted the old one stuck the new one in and bled it and away you go. The only thing I had trouble with was the new one uses different threaded bolts
DSC_0794.JPG
 
Yeah saw that one,it'sa shame the pedal has been cut off but i guess i can probably have it welded or drill two holes and join the old one with two bolts....not ideal and and how i would want it but it would work. Or i could try to be patient and wait for another complete one to come around. Thanks for that
I never noticed that :oops:

I'd only posted it cos the postage was cheaper than this one Look at this on eBay http://www.ebay.co.uk/itm/132089632159:p
 
They've shot up in price in the past 3-years!
Like I said, I bought a brand-new (LRGP) pedal assembly including spring for £35 just 3-years ago (part number SKB500280), now the same item will set you back £100.

I only bought a new one as mine was the old type and needed a re-paint, by spending £35 I had the later part and no painting required.
Ironic thing is that it is now sitting in the shed as I have converted to auto!
 
Back
Top