Clutch pedal pin

The pin that holds the clutch master cylender to the pedal,is proving dificult to get back in,not only that,once thats in iv'e got to get the retaining clip on.Any tips on this,or is it just persivierance.

Got the pin in,Easy peasy,took off clutch master cylender,pushed pedel down to floor,super glued the pin head to an 8 inch long piece of metal coat hanger,plenty room to put the master cylender in place,and manipulate the pin so it pushes back throu the pedal,same with retaining clip,glued it to some stiff wire,slid it in place,pushed it home with a long flat skrew driver.Took me ten minutes.Better than messing under dashboard.

thank you!!!!!

been farting about for over a hour with this bastid pin, came on here to find advice 5 mins later the pin is in!