Clutch no problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

FalconerG

New Member
Posts
4
Location
Uk
Hi all, hoping someone can help
With the issue on my 1980 series 3. Last month I replaced my master and slave cylinders on the clutch. All was working fine, probably only driven 100 miles or so since changing them. Last weekend I drove to my brothers which is only about 1 mile away( again no problems ) when I got back in to come home there was no pressure on the clutch pedal. I looked under the hood and fluid was leaking out of the breather hole in the reservoir cap. Since then I’ve taken both master and slave off but still can’t get any pressure in the pedal. Anyone have any ideas what can be causing this? It goes in and out of gear with the engine off. Is it possible the parts I fitted are just faulty. Or is it likely to be a problem with the clutch or gear box? I’ve bleed the system up and Confident I’ve got all the air out. Any help would be gratefully received.
Many thanks

George
 
Back
Top