Clutch dragging?

congo181 · Apr 23, 2008

Ive got the usual stiff gear change on my Disco 2, and was wondering what I could do to help it.

Going to change the oil tomorrow, but was wondering how to check the clutch wear.

The clutch disengages right at the bottom of the pedal but doesnt seem to be slipping.

Any clutch checks I can perform?

nickh75 · Apr 23, 2008

can you adjust the cable on them?

not sure about d2 but must be simalar to d1
an if i'm talkin out my ares i WILL be corrected!

RAZ8550TDI · Apr 23, 2008

FFS nick yer must know that there hydraulic!! if its biting at the bottom then its a possability that there is fluid loss??? the hydraulic version of a stretched cable for nick's sake!

congo181 · Apr 23, 2008

Hmmm I looked for the reservoir (quickly) but couldnt find it - does it share the brake one? Maybe I could try tightening the adjuster on the hydraulic pipe??

battenberg · Apr 23, 2008

it wouldn't hurt to flush some fluid through just to be sure. also check around the slave for traces of weeping fluid.

congo181 · Apr 23, 2008

The slaves on the bell housing right? And the is the master the small cylinder next to the brake master? I still dont get where the reservoir is though...

RAZ8550TDI · Apr 24, 2008

the res is on the master mate,

congo181 · Apr 24, 2008

Thanks for your help so far fellas.
I'll have another look tomorrow.
Jim

nickh75 · Apr 24, 2008

RAZ8550TDI said:
FFS nick yer must know that there hydraulic!! if its biting at the bottom then its a possability that there is fluid loss??? the hydraulic version of a stretched cable for nick's sake!

ooops!

ffs i forgot

RAZ8550TDI · Apr 24, 2008

hehe!

Clutch dragging?

congo181

Well-Known Member

nickh75

Well-Known Member

RAZ8550TDI

New Member

congo181

Well-Known Member

battenberg

Well-Known Member

congo181

Well-Known Member

RAZ8550TDI

New Member

congo181

Well-Known Member

nickh75

Well-Known Member

RAZ8550TDI

New Member

Similar threads