Classic RARO and Disco 1 Windscreens

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

gordon123123

Member
Posts
12
Hello All , I Believe but could easily be wrong that a windscreen from a Soft Dash Bonded Disco one is the same size and would fit A Classic hard dash RA RO from 1983 , I am asking as in a position to have a Heated Disco Windscreen and asking if it would fit the rubber sealed (new one ordered ) 1983 RARO , i know there is a bit of Blanking at the bottom to hide Soft Dashes but that's not a problem on my Hard Dash , Electrics are not a problem . any advice as to weather it fits in the hole gratefully appreciated.
(All this started off renewing headlining and finding top rail rusted out thus changing that so might as well change scabby rubber and screen! )
 
I don't know for sure, but I 'think' it will work. As far as my knowledge goes the D1's use an RRC screen shape/size wise.
 
You must log in or register to reply here.

Similar threads

G
National Windscreens is hopeless
Replies
5
Views
392
Gingerbread
G
malcolm_durant
RESOLVED: Early Freelander 1: dash-mounted cupholder - retaining "locknut" part number or equivalent?
Replies
4
Views
594
Nodge68
Nodge68
rover75lover
L322 l 322 can bus error error 32
Replies
4
Views
3K
rover75lover
rover75lover
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
R
Disco 2 Disco 2 Interior Fuse Box - XYZ - electrical gremlims
Replies
6
Views
3K
Andy Warren
Andy Warren
Back
Top