kevseabass110
Member
- Posts
- 87
im looking to buy a selection of nice new yellow passivated nuts bolts and washers. What would be the most used size across the classic with regards to fixtures and fittings. I’m thinking mostly M6 and M8?
Classic most common thread size
- Thread starter kevseabass110
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kevseabass110
Member
- Posts
- 87
And does anyone know of a place that sells a “selection” box ?
- Posts
- 3,313
- Location
- Near Heathrow.
Mixture of metric & UNF. With some UNC to make life interesting.
As some go into captive nuts you need to know the thread.
If you use the link above & Lrcat (link below) you'll get the Land Rover part number, type & size for pretty much everything.
http://new.lrcat.com/
I'm fortunate that I have a fastener specialist nearby & if I want one washer - stainless, mild steel etc - they'll sell me one washer ( never had a £1 min charge imposed) Stainless I use on the boat.
www.allscrewedupleicester.co.uk
For some engine (V8 in my case) bolts esp things like the long waterpump ones I've found it easier to either buy from one of the usual suspects or a set from ebay. Just use the LR part number.
As some go into captive nuts you need to know the thread.
If you use the link above & Lrcat (link below) you'll get the Land Rover part number, type & size for pretty much everything.
http://new.lrcat.com/
I'm fortunate that I have a fastener specialist nearby & if I want one washer - stainless, mild steel etc - they'll sell me one washer ( never had a £1 min charge imposed) Stainless I use on the boat.
www.allscrewedupleicester.co.uk
For some engine (V8 in my case) bolts esp things like the long waterpump ones I've found it easier to either buy from one of the usual suspects or a set from ebay. Just use the LR part number.
Last edited:
Similar threads
