Chrysler Torqueflite

G

graham deakin

New Member

Posts

3

• Nov 15, 2012

• #1

I have a 1984 Range Rover 3500 auto Vogue with Air Con , which is still working
It has a 3 speed Chrysler Torqueflite box which works well BUT the transfer box lever seems to be stuck in high range - I have managed to move it once or twice using a hollow tube over the lever to force it to move and low range actually works fine but I would like to free the lever off or fit a new or recon transfer box . Can anyone please advise me how to free off the lever or where I can get a transfer recon box from kind regards Graham

 

Datatek

Well-Known Member

Posts

46,077

Location

Near Poitiers SW France

• Nov 15, 2012

• #2

I think there was a thread about this a while back, it could just be the lever seized in the housing. Strip and clean job.

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Nov 15, 2012

• #3

its been a couple of years since i rebuilt a 3 speed box ,normally the linkage seizes rather than a t/box issue ,the lever housing has a cross shaft this normally gets tight were it passes through lh side aliminum end cap it be worth taking housing apart cleaning shat etc and applying plenty of grease ,t/box for 3 speed is a 1.003 and isnt so common

 

G

graham deakin

New Member

Posts

3

• Nov 15, 2012

• #4

hi
many thanks for your help
just joined and loved the comment that I can't view this users picture because I am too stupid

stupid old Graham

 

G

graham deakin

New Member

Posts

3

• Nov 19, 2012

• #5

many thanks
Graham

 

kevwill

Active Member

Posts

930

Location

Sunny Hastings

• Nov 19, 2012

• #6

graham deakin said:

hi
many thanks for your help
just joined and loved the comment that I can't view this users picture because I am too stupid

stupid old Graham

Click to expand...

Yukkk! Wish I was stupid. It's a picture of jamesmartin naked on a Rangey bonnet.