Chequer plate for 3 door 98 300TDi XS

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

damoyorkie

Member
Posts
42
Location
God's Own County
Any ideas where I can get a chequer plate kit for my 3 door 98 300TDi XS ? The bottom of the doors are beginning to go, and the panel in front of both rear wheel arches has recently crumbled after a good jet wash.

I reckon it's cheaper to cover with chequer plate, after trying to treat the rust and seal it.

I can only find the Rebel kit, but it seems not to be for the XS. Any suggestions ?

Cheers,

Damo
 
Cheers for that Andy,

I went onto e-bay, and found a set for a three door, but also found why they are not recommended for the XS. Apparently the rubbing strip trim is slightly wider than on other 3-doors, and the chequer plates will have to be trimmed slightly to fit.

I figure a set of black ones will look slightly less "bling", but slightly better than the current grey rust patches.

Thanks again for your help.

Damo
 
Back
Top