During the oil change on my car last year, the sump plug lost half its thread while i was trying to remove it. it ended up loose, wouldnt tighten up and woughdnt unscrew either. Had to remove the sump,still full of oil, then drill out the sump plug, after id emptied the oil obviously,then go down the dealers for a new sump plug before putting it all back together.Didnt fancy a repeat this year ,so bought a 3 way pump, pump, suck and transfer air/liquids. As the car,s dipstick tube gives access to the bottom of the sump, I will use this method to drain the oil this time.
Will the same method work with a 300 tdi?
Thank you.
Will the same method work with a 300 tdi?
Thank you.