cableliquid
Member
- Posts
- 70
right checked outer plug to light bar (where its earthed) its good, and got continuity up the twig (once i scraped the paint off it!
CB arial and light bar.
- Thread starter cableliquid
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
cableliquid
Member
- Posts
- 70
anyone at peterborough?
KevAmiga
Active Member
- Posts
- 174
- Location
- Swansea, South Wales
whats swr now?
cableliquid
Member
- Posts
- 70
still off the scale 
KevAmiga
Active Member
- Posts
- 174
- Location
- Swansea, South Wales
How are you using SWR meter
Set to FWD
KEy up mic, cal to SET
switch to REF
?
Set to FWD
KEy up mic, cal to SET
switch to REF
?
cableliquid
Member
- Posts
- 70
yeah, the dial doesn't go far enough for me to set it though....
KevAmiga
Active Member
- Posts
- 174
- Location
- Swansea, South Wales
Check the patch lead. USe multimeter again to check.
What radio
?
What radio
?
Zigster
Active Member
- Posts
- 138
- Location
- Chesterfield, Derbyshire
Like I said... if you can get yourself to Clay Cross I'll sort it for you.
I got soldering iron etc, spare coax and plugs and a SWR meter I trust.
If I had any transport I'd meet you somewhere but unfortunately it's a long walk from here
The offer is there....
I got soldering iron etc, spare coax and plugs and a SWR meter I trust.
If I had any transport I'd meet you somewhere but unfortunately it's a long walk from here
The offer is there....
KevAmiga
Active Member
- Posts
- 174
- Location
- Swansea, South Wales
Sounds like an offer id take tbh.
cableliquid
Member
- Posts
- 70
If I can't get it sorted at Peterborough I'll come to you mate. Not that I know where clay cross is.
Zigster
Active Member
- Posts
- 138
- Location
- Chesterfield, Derbyshire
Clay Cross is 7 miles south of Chesterfield and 5 miles north of Alfreton on the A61
cableliquid
Member
- Posts
- 70
okay mate, I'm hoping someone will give me help at peterborough show! if not ill travel to you....
Zigster
Active Member
- Posts
- 138
- Location
- Chesterfield, Derbyshire
No Worries.
Either way it will get sorted for you.
Just hope you haven't already damaged the output finals.
Either way it will get sorted for you.
Just hope you haven't already damaged the output finals.
KevAmiga
Active Member
- Posts
- 174
- Location
- Swansea, South Wales
What radio is it?
cableliquid
Member
- Posts
- 70
got it sorted at peterborough, thanks guys, bought new cable, mount and swr'd it and it worked great!
KevAmiga
Active Member
- Posts
- 174
- Location
- Swansea, South Wales
Which cable? The patch cable or the main antenna cable?
KevAmiga
Active Member
- Posts
- 174
- Location
- Swansea, South Wales
Ah sorry i see - you changed the mount too. Glad you got it sorted!!!
Next time skip is up get the landy up on a high hill and shout! I have spoken to people your way before, anything's possible
Next time skip is up get the landy up on a high hill and shout! I have spoken to people your way before, anything's possible
cableliquid
Member
- Posts
- 70
ill be up a high later tonight just to get the final adjustments dialled in, and angle my new lights too, ill give a good holla on 19
KevAmiga
Active Member
- Posts
- 174
- Location
- Swansea, South Wales
tidy. I have motor club tonight so may not be up high, plus there's no lift atm.
what radio? (i think i asked you about 10 times now!)
what radio? (i think i asked you about 10 times now!)
cableliquid
Member
- Posts
- 70
MOONRAKER MINOR UK 40 CHANNEL CB RADIO - Moonraker CB Transceivers - CB Transceivers - Citizen Band Radio this at current but wondering if i get a different rig will that give me better coverage>?
Similar threads
