Castor correction Angle?

-Defender110- · Jul 6, 2012

Hi lads, Can anyone tell me the correct castor correction angle on 110 trailing arms for a 2" lift? I have a bar benders here so while its off i might as well do it

Ta

Trewey · Jul 6, 2012

3 degrees.

deaftonewonder · Jul 6, 2012

whilest the subjects up, would anyone mind explaining me what castor correction is?

still learning!

-Defender110- · Jul 6, 2012

My crude understanding is that, due to the fact that i have a lift, my trailing arms, which used to sit close enough to level are not at an angle and straining the bushes, so by bending them a bit they straighten out at the bush end

deaftonewonder · Jul 6, 2012

legend cheers!

so its only applicable for lifted vehicles -or do all landys have this?

pressbrake · Jul 6, 2012

castor is connected to the ackerman angle which is to do with your steering.
by mentioning trailling arms I believe he means the rear which is not a castor angle as such more pinion angle and roll centre.
The castor angle on the front is linked to the suspension geometry wherever wish bone, leading arm or trailling arm

Castor correction Angle?

-Defender110-

Well-Known Member

Trewey

Cockernee, Pasty munchin bastid.

deaftonewonder

New Member

-Defender110-

Well-Known Member

deaftonewonder

New Member

pressbrake

Well-Known Member

Similar threads