For Sale my Heavy Duty Car ramp system as I was/am always worried about jacks/axle stands or small lift solution. This was the best I could find to store a vehicle on normally and safely lift and keep lifted for extended periods.
This is the link from the website, interestingly it looks like SEALEY have purchased the chap out and started making them, themselves. Nice chap he was open and honest and just had designs he sent to the closest fabrication place and then would make £200 off each set made.
I purchased from here in 2020 and they work great but I cant use them as I cant get out of the shed due to the way the previous bleeder built another shed at a funny angle meaning I need to be turning as I exit the building. I can have them in the other shed however I cant raise the LR without boinking the bonnet due to the lean on the roof.
I paid £1400 for them, they are ruddy heavy and HD version supports Land Rovers (width and weight) so purchased with 110 CSW in mind.
MR1® Heavy Car Lift - Owner’s Manual Introduction
This MR1®car lift was designed for the majority of fourwheeled modern and classic cars, especially those too heavy or large to be used with the MR1 Classic and Modern car lifts. Indeed, it may be used for any four-wheeled vehicle having weights and dimensions within the following specification.
Specification
Maximum weight of car/safe working load (SWL): 2600kg (5720lb)
Maximum track: Adjustable to 1700mm (67in)
Maximum tyre width: 305mm (12in)
Maximum wheel base: 3000mm (118in)
Minimum ground clearance of car: 75mm (3in)
They are in good nick (nowt can happen to them) a little surface rust but they have always been stored in a shed.
Can help loading.
Open to sensible offers, fully appreciate it may take a while for interest as its one of those things you either need or dont.
Car lift/ramps - the simple unique patented MR1s for DIY mechanics
Long shallow ramps raised to horizontal with trolley/floor jack. Quick/simple/safe/portable. They adjust to car width and are ideal for narrow low headroom garage spaces, and give a clear floor space to work under a car. Excellent for low ground-clearance cars. The MR1s are low maintenance and...
carlift-ramp-mr1.com
This is the link from the website, interestingly it looks like SEALEY have purchased the chap out and started making them, themselves. Nice chap he was open and honest and just had designs he sent to the closest fabrication place and then would make £200 off each set made.
I purchased from here in 2020 and they work great but I cant use them as I cant get out of the shed due to the way the previous bleeder built another shed at a funny angle meaning I need to be turning as I exit the building. I can have them in the other shed however I cant raise the LR without boinking the bonnet due to the lean on the roof.
I paid £1400 for them, they are ruddy heavy and HD version supports Land Rovers (width and weight) so purchased with 110 CSW in mind.
MR1® Heavy Car Lift - Owner’s Manual Introduction
This MR1®car lift was designed for the majority of fourwheeled modern and classic cars, especially those too heavy or large to be used with the MR1 Classic and Modern car lifts. Indeed, it may be used for any four-wheeled vehicle having weights and dimensions within the following specification.
Specification
Maximum weight of car/safe working load (SWL): 2600kg (5720lb)
Maximum track: Adjustable to 1700mm (67in)
Maximum tyre width: 305mm (12in)
Maximum wheel base: 3000mm (118in)
Minimum ground clearance of car: 75mm (3in)
They are in good nick (nowt can happen to them) a little surface rust but they have always been stored in a shed.
Can help loading.
Open to sensible offers, fully appreciate it may take a while for interest as its one of those things you either need or dont.
Last edited:
