Can anyone help me with this?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

nickliv

Active Member
Posts
113
Location
Aberdeenshire
My bodgathon continues, (Or should I say my rectification of someone elses bodgeathon) continues.

My old front bumper was held together with chequer plate, and held on with 3 bolts.

Has anyone got a spare defender bumper mounting bolt?

Also, On removing the panel on the left wing to fit the snorkel, I discover that the nice moulded piece of plastic that should be inside the wing isn't there, and the end of the air intake hose is just flapping about in there. (It's a moulded 90 degree bend on the flext intake hose)

Anyone got the nice moulded piece of plastic that I can then fix the loose end of the hose and the snorkel onto?

Cheers etc.

Nick
 
i used grade 8.8 hardened steel bolts 4 me bumper, cheap, easy 2 get, strong enough 4 recovery.

that cheap and easy i get them from B&Q when am really in the ****;) fer yer snorkel try a solvent weld waste pipe fitting , the type yer use under the bath etc, come in a few sizes , cut a slot down one side and use a jubilee clip to fix
 
Back
Top