Bump stops

R

Rich

Guest

• Aug 13, 2005

• #1

Thanks I suppose I will have to fabricate my own then.

Rich

--
To reply remove " spam "

 

N

Nige

Guest

• Aug 13, 2005

• #2

Rich wrote:
> Thanks I suppose I will have to fabricate my own then.
>
> Rich

eh?

--
Subaru WRX (Annabel)

Landrover 110 County Station Wagon (Tyson)

'"Say hello to my little friend"

 

R

Rich

Guest

• Aug 13, 2005

• #3

Ah, this is what I put in my first post a couple of days ago.

Hi all, are the brackets which are welded to the under side rails on old
Range Rovers which hold the bump stops obtainable as a part to weld on, mine
have rusted away.

Rich

--
To reply remove " spam "
"Nige" <[email protected]> wrote in message
news:[email protected]...
> Rich wrote:
> > Thanks I suppose I will have to fabricate my own then.
> >
> > Rich
>
> eh?
>
> --
> Subaru WRX (Annabel)
>
> Landrover 110 County Station Wagon (Tyson)
>
> '"Say hello to my little friend"
>
>

 

N

Nige

Guest

• Aug 13, 2005

• #4

Rich wrote:
> Ah, this is what I put in my first post a couple of days ago.
>
> Hi all, are the brackets which are welded to the under side rails on
> old Range Rovers which hold the bump stops obtainable as a part to
> weld on, mine have rusted away.
>
> Rich
>
>> Rich wrote:
>>> Thanks I suppose I will have to fabricate my own then.
>>>
>>> Rich
>>
>> eh?
>>
>> --
>> Subaru WRX (Annabel)
>>
>> Landrover 110 County Station Wagon (Tyson)
>>
>> '"Say hello to my little friend"


Ah right, thought you had chucked a whitey!!

Shouldn't be too much trouble to get it sorted. Get measurements & take it to a local metal workers, they
could knock it up in 5 minutes for you!

--
Subaru WRX (Annabel)

Landrover 110 County Station Wagon (Tyson)

'"Say hello to my little friend"

 

R

Rich

Guest

• Aug 13, 2005

• #5

Yes, I am now going to manufacture my own myself as it seems that they are
not something you can get. but just thought it might save some time if I
could just buy them and weld them on. Do you know off hand what the original
thickness is of the main chassis rails have some plasmaring and welding to
do have not had a chance to try and measure the thickness so I have asked..

Rich

>
>
> Ah right, thought you had chucked a whitey!!

<snip> no been having trouble with being able to see my posts, been on to
ntl and they say they have sorted it


> Shouldn't be too much trouble to get it sorted. Get measurements & take it
to a local metal workers, they
> could knock it up in 5 minutes for you!
>
> --
> Subaru WRX (Annabel)
>
> Landrover 110 County Station Wagon (Tyson)
>
> '"Say hello to my little friend"
>
>

 

R

Rich

Guest

• Aug 13, 2005

• #6

Yes, I am now going to manufacture my own myself as it seems that they are
not something you can get. but just thought it might save some time if I
could just buy them and weld them on. Do you know off hand what the original
thickness is of the main chassis rails have some plasmaring and welding to
do have not had a chance to try and measure the thickness so I have asked..

Rich

 

A

Austin Shackles

Guest

• Aug 13, 2005

• #7

On or around Sat, 13 Aug 2005 19:17:16 GMT, "Rich"
<[email protected]> enlightened us thusly:

>Yes, I am now going to manufacture my own myself as it seems that they are
>not something you can get. but just thought it might save some time if I
>could just buy them and weld them on. Do you know off hand what the original
>thickness is of the main chassis rails have some plasmaring and welding to
>do have not had a chance to try and measure the thickness so I have asked..

'bout 2mm, I think.
--
Austin Shackles. www.ddol-las.net my opinions are just that
If all be true that I do think, There are five reasons we should drink;
Good wine, a friend, or being dry, Or lest we should be by and by;
Or any other reason why. - Henry Aldrich (1647 - 1710)