bulkhead post to post hole centers

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

lenny the landy

Member
Posts
14
Has anyone got information on the measurements for the bulkhead door post to door post or chassis outrigger to chassis outrigger hole centres for a series 2A I am guessing at 1505 mm but as the bulkhead & outrigger are so rotten they have crumbled I managed to measure but not sure if this is correct have got the bulkhead off and ready to rebuild both sides have looked in the manual but it only states the chassis measurements overall and not hole centres can anyone help thanks
 
Brnocz has emailed me a size this may help others
(Brnocz) ive just measured my bulk head bolts, taking into account mine is a series3, the distance from bolt hole to bolt hole is 1.510 which is a little slight diference to yours, also the bulk head is across the bottm of the w/screen 1.525. from pillar to pillar taken from the bottom of the bulk head pillars is 1.610 from the bottom of pillars to center of bolt holes is 50mm. hope this helps you regards jim.
thanks alot Jim this has really helped me
we need more information on any hole centre`s that the manual doesn`t state its a nightmare rebuilding the body when its been damaged or rotten and trying to guess the centres
hope this helps others
 
You must log in or register to reply here.

Similar threads

K
Series 3 S3 bulkhead dimensioned drawing
Replies
0
Views
393
kenixster
K
F
Bulkhead Identification
Replies
4
Views
465
Wildefalcon
W
S
replacement bulkhead
2
Replies
37
Views
2K
Steg750
S
chrisstdt
Galvanised bulkhead
Replies
17
Views
819
miktdish
miktdish
O
Body Alignment Help Needed
Replies
17
Views
2K
catman275
catman275
Back
Top