Bulb change for clock in a 93 Disco

A

Alan Berry

Guest

• Jan 30, 2005

• #1

Anyone know if it is possible to get the digital clock out of its fixing to
change the bulb without having to remove panel + heater controls etc.

Thanks

 

C

Colonel Tupperware

Guest

• Jan 30, 2005

• #2

On Sun, 30 Jan 2005 15:52:20 -0000, "Alan Berry"
<[email protected]> wrote:

>Anyone know if it is possible to get the digital clock out of its fixing to
>change the bulb without having to remove panel + heater controls etc.
>
Anything is Possible.
Practical, is another matter entirely.

In other words, dunno, I've not tried it.

--
ColonelTupperware,
spouting bollocks on Usenet since 1997
Usenet FAQ at
http://www.its.caltech.edu/its/services/internetapps/news/news2.shtml
UPCE FAQ at http://upce.org.uk/ UKRM FAQ at http://www.ukrm.net/faq/

 

M

murph

Guest

• Jan 30, 2005

• #3

Alan,
I take it your clock is to the left of the heater controls as it is pre 94,
the clock does come on it own, just insert a small thin screwdriver under it
and lever it out when it pops do the same at the top and out it comes, just
done mine today, I'll get the bulb tomorrow.

Mark
"Alan Berry" <[email protected]> wrote in message
news:[email protected]...
> Anyone know if it is possible to get the digital clock out of its fixing
to
> change the bulb without having to remove panel + heater controls etc.
>
> Thanks
>
>

 

S

StaffBull

Guest

• Jan 30, 2005

• #4

stick a credit card top and bottom and pull it out
"Alan Berry" <[email protected]> wrote in message
news:[email protected]...
> Anyone know if it is possible to get the digital clock out of its fixing
> to
> change the bulb without having to remove panel + heater controls etc.
>
> Thanks
>
>

 

A

Alan Berry

Guest

• Jan 31, 2005

• #5

Thanks Mark - I ve had the bulb for ages jus was not sure how to get at the
clock for fear of breaking it. Bulbs for my disc are a bit of a problem
since my LR dealer doesn't hold much stock.



Cheers.

"murph" <[email protected]> wrote in message
news:[email protected]...
> Alan,
> I take it your clock is to the left of the heater controls as it is pre
94,
> the clock does come on it own, just insert a small thin screwdriver under
it
> and lever it out when it pops do the same at the top and out it comes,
just
> done mine today, I'll get the bulb tomorrow.
>
> Mark
> "Alan Berry" <[email protected]> wrote in message
> news:[email protected]...
> > Anyone know if it is possible to get the digital clock out of its fixing
> to
> > change the bulb without having to remove panel + heater controls etc.
> >
> > Thanks
> >
> >
>
>

 

A

Alan Berry

Guest

• Jan 31, 2005

• #6

Hand'nt thought of that. thanks


"StaffBull" <[email protected]> wrote in message
news:[email protected]...
> stick a credit card top and bottom and pull it out
> "Alan Berry" <[email protected]> wrote in message
> news:[email protected]...
> > Anyone know if it is possible to get the digital clock out of its fixing
> > to
> > change the bulb without having to remove panel + heater controls etc.
> >
> > Thanks
> >
> >
>
>