Riggwelter
Active Member
- Posts
- 186
- Location
- Sweden
On my Landy Series III, truck cab/pickup, diesel, 1977, I seem to have factory fitted anchorages for harnesses. I am thinking of getting the static lap and diagonal belt thing from Paddocks, but I am not sure they will fit. Please see the images below. From left to right: IMG 0072: The sticker claiming it to be all fitted. IMG 0073: the corner behind the driver, is the threaded hole an anchorage point? IMG 0078: The gusset on the driver's side (yeah, I know it's mucky...). IMG 0081: two pairs of shining screws. Are they there for the buckles, or to keep something else, like the cab, connected to the chassis?
![IMG_0072.JPG IMG_0072.JPG](https://www.landyzone.co.uk/data/attachments/101/101868-fcdbad92506a577919d5a323a10e6bd9.jpg)
![IMG_0073.JPG IMG_0073.JPG](https://www.landyzone.co.uk/data/attachments/101/101869-8cb57ac65db9e3a24579657428297bd1.jpg)
![IMG_0078.JPG IMG_0078.JPG](https://www.landyzone.co.uk/data/attachments/101/101870-805ab0455bf0518ba186e0e6f59b1eea.jpg)
![IMG_0081.JPG IMG_0081.JPG](https://www.landyzone.co.uk/data/attachments/101/101871-c8a78bc7d1d5a2e7f19b8d3caf51d1b6.jpg)