PPP38vouge
Active Member
- Posts
- 411
- Location
- deddington, oxfordshire
Can't seem to get these bloody smiley faces to work?
Sorry Alan, my bad.
Brake pedal switch not adjustable on mine.
It is if it's the correct part.
Adjusting it is part of a technical bulletin I've just read. If you've changed the modulator from the one that was fitted in the factory, you should have adjusted the brake light switch to fit the new modulator.
According to RAVE, you pull the switch from the mounting plate, pull the plunger all the way out, press the brake pedal all the way in, refit the switch and allow the pedal to come back up. It should then set the plunger to the correct position.
Are you sure your modulator is working just fine, and all you need to do is adjust the switch?
It is if it's the correct part.
Adjusting it is part of a technical bulletin I've just read. If you've changed the modulator from the one that was fitted in the factory, you should have adjusted the brake light switch to fit the new modulator.
According to RAVE, you pull the switch from the mounting plate, pull the plunger all the way out, press the brake pedal all the way in, refit the switch and allow the pedal to come back up. It should then set the plunger to the correct position.
Are you sure your modulator is working just fine, and all you need to do is adjust the switch?
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!