Brake Lights

Help guy's,

My Wife noticed this aft that I had no brake lights coming on at all. I checked the fuse and thats ok and I also checked the bulbs and they look fine too.
Next I put a meter across the terminals on the centre/high stop light and I've got no power coming thro' at all when the brake pedal is applied??
And assuming all the stop lights are on the same circuit, I imagine there be no power at the 2 side one's???
The only work I have done on the truck in the last two weeks is to put new shockers and springs on and the only thing I disconnected was the connectors to the Front ABS cables so I didnt stretch them when I lowered the axle.

Any Ideas lads?????

Dave

witch disco, and check 4 power at pedal switch

Thanks Uncle Albert,

Will check that in morning. What could it be if there no power there???
I got a 1997 Disco 300tdi.

Dave

Case of get metre out and follow wires back untell you find a feed.or towards light if you have power at switch

Cheers bud.....

The ABS on my 95 ES D300 registers faults with the brake lights mine packed up and reading the ABS fault chart is said brake light switch fault. hope this helps.