Brake fluid sensor connector wire snapped please help.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Skiddy 1

Member
Posts
13
1000000765.jpg
 
Take the plug off, depin the offending 1 and undo the pin with a couple of “watchmaker” screw drivers, then re crimp to the wire with a small set of pliers.
Strip the insulation off the wire first of course ;).

J
 
Electrical connector for the wire. I couldn't get the pin out so bodged it. There is a few Freelanders breaking near me so I will get one next week and do it right. Cheers
 
Back
Top