bodgit0_0
New Member
- Posts
- 302
- Location
- Tidworth Or Stourport-On-Severn
Wasn't sure which area to put this in so thought I'd try here.
I have just coil sprung my 80 chassis and have fitted some early rangy axles (late 70,s/early 80's) ish. The front calipers have two fluid feeds.
What I want to do is replace the front calipers with a single feed set but Im not sure if or what model to get these replacement parts from.
Lastly I have not built a servo into the brake system and would like any pointers on what master cylinder to use, currently a clutch pedal assy is fitted but not yet plumbed until some advice is recieved.
Cheers for you help.
Lee
I have just coil sprung my 80 chassis and have fitted some early rangy axles (late 70,s/early 80's) ish. The front calipers have two fluid feeds.
What I want to do is replace the front calipers with a single feed set but Im not sure if or what model to get these replacement parts from.
Lastly I have not built a servo into the brake system and would like any pointers on what master cylinder to use, currently a clutch pedal assy is fitted but not yet plumbed until some advice is recieved.
Cheers for you help.
Lee
