bonnet types

Locky1978 · May 17, 2012

Hi Chaps, being fairly new to the series landy scene, I've always wondered what years was the bonnet made with the straight front edge. I mean the edge above the front grill.

Mines rounded at the front so I take it this is a later one?

mad git · May 18, 2012

Mines rounded at the front too

SpringDon · May 18, 2012

This is quite possibly rubbish but...
I think the rounded edge is the deluxe(?) bonnet and were an option for series 2 and standard on series 3.
There is also the straight edged one with a recess for the spare wheel. Dunno what that is- military?

Locky1978 · May 18, 2012

Ah ok, I've always wondered because I've seen the straight edge ones on quite late series 3's but of course bonnets are easy to swap. So probably not the orginal one.

bakerstreet · May 18, 2012

I think the 2A had the 'razor' edged bonnet as standard and some early 3s had it, but the later series threes all had the round edged bonnet.

I thought the delux bonnet was the one that had the spare wheel well on top of it and was available in series 2A and series 3?

SpringDon · May 18, 2012

Ah well I was close. All the right words just not necessarily in the right order.

owl · May 18, 2012

I think the straight bonnet is the standard bonnet on 2's and 3's the rounded bonnet is as posted the deluxe option and recessed spare wheel carriers another option. Used to see the deluxe mostly on LWB's though they could of been standard on safari spec motors.

Johnny_Regis · May 19, 2012

My early SIII has the 'razor edge' bonnet, my later model diesel I had a few years ago had the rounded bonnet and was a standard 88 model. I think the razor edge was phased out early in SIII production.

bonnet types

Locky1978

Active Member

mad git

New Member

SpringDon

Well-Known Member

Locky1978

Active Member

bakerstreet

New Member

SpringDon

Well-Known Member

owl

Well-Known Member

Johnny_Regis

Active Member

Similar threads