blody indicators

Ah right now then yer see my trailer light used to flash when I put the left hand indicator on but not the right hand one and when I put the hazards on. Now since I've tidied all the wiring up it only comes on when the hazards are on. Aye explain that then ey!

GRUNT said:

Ah right now then yer see my trailer light used to flash when I put the left hand indicator on but not the right hand one and when I put the hazards on. Now since I've tidied all the wiring up it only comes on when the hazards are on. Aye explain that then ey!

Click to expand...

yer wire tidying is ****. stick to pigs

GRUNT said:

Ah right now then yer see my trailer light used to flash when I put the left hand indicator on but not the right hand one and when I put the hazards on. Now since I've tidied all the wiring up it only comes on when the hazards are on. Aye explain that then ey!

Click to expand...

mine was the same!!!!

pete north said:

mine was the same!!!!

Click to expand...

It'll have summat to do with the load on the relay so if there's a crappy earth or even a crappy live the load will possibly be greater, as if a trailer is connected and its indicators are indicatoring an so set the trailer light off. The problem you have is probly cos everything else is getting power from the indicator circuit either from a live wire plugged into the wrong circuit, a ****e earth so everything is earthing through the indicator circuit, or summat else that I can't think of at the moment.