blend motors

gazzab79 · Sep 14, 2013

Hi everyone.

anybody local to manchester got a nanocom or something to re calibrate the blend motors? went for a drive today and the book symbol had gone off! but appeared again on way home. want to try re calibrating before the dash gets ripped out!

fanatic · Sep 14, 2013

Range rovers.net howto and all blend motors can be done dash in situ

Druim · Sep 14, 2013

gazzab79 said:
Hi everyone.

anybody local to manchester got a nanocom or something to re calibrate the blend motors? went for a drive today and the book symbol had gone off! but appeared again on way home. want to try re calibrating before the dash gets ripped out!

If lucky it could be loose connector back of hevac, only need radio out to reach so easy check

gfromleeds · Sep 14, 2013

Of subject a little im in the middle of changing my matrix o rings and got the speedo out I can see to blend motor for the air direction and was wondering if its possible to get it out through the speedo hole? As mines been faulty for a while or has it got to be dash off?

Druim · Sep 14, 2013

gfromleeds said:
Of subject a little im in the middle of changing my matrix o rings and got the speedo out I can see to blend motor for the air direction and was wondering if its possible to get it out through the speedo hole? As mines been faulty for a while or has it got to be dash off?

see post #2

gazzab79 · Sep 14, 2013

I just wanna get it on diagnostic before I start fiddling.

blend motors

gazzab79

New Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Druim

Well-Known Member

gfromleeds

Well-Known Member

Druim

Well-Known Member

gazzab79

New Member

Similar threads