Billy's budget defender project

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Sorry about that mate, but at least you know now rather than later when it's on the road.
All the best,
Andy
 
Yeah, defo a minor blip, I've been enjoying this thread. Also, it's not easy working outside especially with how unpredictable the weather is at the moment. Great job, keep it coming.
 
HandyAndyr said:
Sorry about that mate, but at least you know now rather than later when it's on the road.
All the best,
Andy
Click to expand...
Dont worry Andy I appreciate the shout, that why it gets posted, so you guys out there can observe and report all my fook ups

I keep looking at it and wondering how I ever thought that was right ;););)
 
Just read through this thread. Don't know how I haven't spotted it before, but it is great so far, thanks for posting.

I haven't seen anyone do so much welding in a rebuild before, I admire your determination ;) Interesting to hear that the TD engine was fitted recently. That's the first time I've heard of one being put in retrospectively, normally they are taken out and replaced! Hopefully it gives you good service, I believe the performance of this engine is not too bad thanks to the turbo.


Welcome to the Green Land Rover Ninety owners club by the way! Glad to see you are reusing the original steel wheels. They look good with some paint on them.:):)
 
Finished work at a reasonable hour, so I started to clean up the underside of the tub

8be53c7774de9b41e0312261002a1857_zpsef4c38de.jpg


Put some etch primer on the exposed alu

d568b52962b6b2a21ca0469c05297276_zps824833c6.jpg


Removed the seat beats found a load of corrosion behind the bracket, I think I will plate it with sheet alu

36a42f0aa3f60a4ec164e9fe216c1f22_zps9e30b94a.jpg




Has anyone had to do this? Advice always welcome ;)
 
Landyjd said:
Interesting to hear that the TD engine was fitted recently. That's the first time I've heard of one being put in retrospectively, normally they are taken out and replaced! Hopefully it gives you good service, I believe the performance of this engine is not too bad thanks to the turbo.:):)
Click to expand...

It does happen. I bought my 90 wit a Turner engine with 1k miles on it. Chap had fallen on hard times and couldn't run it. I put a new turbo, IP, heater matrix and injectors on it and it has been great for 25,000 miles, never had any trouble even though it is worked hard.

tbn009_zps167e3045.jpg
 
Billy B said:
Has anyone had to do this? Advice always welcome ;)
Click to expand...
That is a particularly nasty one but this is fairly common usually where the alloy meets steel.You might be able to cut a sheet of alloy bigger than the corroded area and drill and pop rivet it in a number of places around the edge. I think it is possible to weld the alloy, although difficult as it doesn't change colour at all before it melts.
Whatever you do, when you've done it make sure you get plenty of paint, mastic or whatever in between the alloy and any steel parts this will stop further problems.
 
Turboman said:
That is a particularly nasty one but this is fairly common usually where the alloy meets steel.You might be able to cut a sheet of alloy bigger than the corroded area and drill and pop rivet it in a number of places around the edge. I think it is possible to weld the alloy, although difficult as it doesn't change colour at all before it melts.
Whatever you do, when you've done it make sure you get plenty of paint, mastic or whatever in between the alloy and any steel parts this will stop further problems.
Click to expand...

Plate and rivet was my thinking, I've got some anti corrosion tape that we use at work for alu and steel

Cheers turbo
 
Billy B said:
That my friend is spot on

Cheers ;)
Click to expand...


No problem. Seeing your thread makes me wana do a strip down and rebuild of mine. Think my chassis will last a few more years if i clean it up patch and protect it.

Have you set yourself a budget for the work and parts?
 
BearDy89 said:
No problem. Seeing your thread makes me wana do a strip down and rebuild of mine. Think my chassis will last a few more years if i clean it up patch and protect it.

Have you set yourself a budget for the work and parts?
Click to expand...

I want to keep it less that a grand, I'm up to about £500 at the mo, but I still need to get a re con turbo

I ordered the paint for £60 today:(
 
sounds good I think I could do mine for £500 as Mine needs mainly hard graft, welding and paint.

Not may new parts.

I am tempted to get on with it. Space is my only issue!
 
You must log in or register to reply here.

Similar threads

I
Help required in the Portsmouth area 110 300tdi defender
2
Replies
24
Views
2K
dag019
dag019
Tirran
My new Landy project
Replies
7
Views
636
Tirran
Tirran
C
Auto discovery box into a 200tdi defender?
Replies
5
Views
665
Can’t Decide
C
L
Cracked & split mudflaps
Replies
2
Views
223
dag019
dag019
M
Pump to the steering box pipe
Replies
4
Views
550
mma59
M
Back
Top