Flossie
Well-Known Member
- Posts
- 11,050
- Location
- Shropshire
Cut out and rejoin this lot, going to do both sides.solder and heat shrink or is that old fashioned now?
P38A Best way to
- Thread starter Flossie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 45,018
- Location
- Near Poitiers SW France
One wire at a time, solder and glue filled heat shrink, no better way IMO.
- Posts
- 33,886
- Location
- North Shropshire
Might be old fashioned, but it's tried, tested and proven
Flossie
Well-Known Member
- Posts
- 11,050
- Location
- Shropshire
Not heard of that...I shall go search
, Ta.
, Ta.
Flossie
Well-Known Member
- Posts
- 11,050
- Location
- Shropshire
Ive got the dreaded green stuff, not too bad but I've found my usual heat shrink isn't always damp proof if you get me? Glue lined sounds more 'dampproffery' to me
- Posts
- 33,886
- Location
- North Shropshire
It's good stuffIve got the dreaded green stuff, not too bad but I've found my usual heat shrink isn't always damp proof if you get me? Glue lined sounds more 'dampproffery' to me
brianp38dse
Well-Known Member
- Posts
- 20,093
- Location
- heathrow
Flossie
Well-Known Member
- Posts
- 11,050
- Location
- Shropshire
Thats impressive, but I've already ordered some glue lined stuff, I need to be dragged slooooowly into the future
Flossie
Well-Known Member
- Posts
- 11,050
- Location
- Shropshire
Got the plier things, think it was Alan who put me on to them a few months back. What's the most used size for those solder melt things on the kick panel white plug wires? Think I'll get some anyway and see which turns up first and use them.
brianp38dse
Well-Known Member
- Posts
- 20,093
- Location
- heathrow
I put Alan on to the pliers, i dont know what size fits the white plugs, i have a box which have been used for other wiring.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Datatek
Well-Known Member
- Posts
- 45,018
- Location
- Near Poitiers SW France
The crimps are not as good as solder and glue filled heatshrink, BT and other telecom companies use them cos they are quick but they do sometimes fail.
Flossie
Well-Known Member
- Posts
- 11,050
- Location
- Shropshire
While I'm waiting for this heat shrink stuff to arrive is there any other connections that give bother and are worth looking at or even cutting out?
- Posts
- 3,946
- Location
- Near Heathrow.
Both white connectors in both L & R footwells. Mine look like this:
