just replaced my water pump and belt on my 300 tdi thinking that was where the squeaking noise was coming from, to find out its the belt tensioner next to it. looking on ebay new tensioners are about £40 and a straight swap but there are also people selling bearings at just a fiver which is a good saving but is it an easy repair or im i better just getting the full tensioner
belt tensioner
- Thread starter birdy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
lerk
New Member
- Posts
- 1,763
- Location
- Creswell, Derbyshire UK
depends how good you are with the spanners... and the state of your current tensioner i would say!
One nut to swap the entire thing, or remove the tensioner then dismantle and replace the bearings.. your choice really
One nut to swap the entire thing, or remove the tensioner then dismantle and replace the bearings.. your choice really
It comes off easy, and at a fiver worth a go. A half decent vice and a socket the right size. Remember to wear goggles tho cos the bearings are had as **** and bits come off them like shrapnel.
If you can get the bearing out, even in bits and you look up somebody like bearing services chances they can match it for even less than a fiver.
shocker
Well-Known Member
- Posts
- 2,038
- Location
- BODMIN MOOR,KERNOW
watch that wheel cos its brittle and they sometimes explode while pressing the bearings out
andyb66
Well-Known Member
- Posts
- 1,795
- Location
- Middle of Salisbury Plain, Wiltshire
battenberg
Well-Known Member
- Posts
- 2,101
- Location
- Birmingham UK
karlo
New Member
- Posts
- 84
- Location
- Swadlincote, South Derbyshire
Try the penny trick first,
Loosen the tensioner and put a 1p coin behind it at the 9 'o' clock position and tighten it back up, if it still squeaks try replacing the bearing.
Loosen the tensioner and put a 1p coin behind it at the 9 'o' clock position and tighten it back up, if it still squeaks try replacing the bearing.
Similar threads
Disco 4 (LR4)
2016 DISCO 4 sdv6
