chip2366
Member
- Posts
- 86
- Location
- nottingham
hi all can you tell me if it is posible to change the becm from a donor car as i have a L and in need a h thanks
becm help
- Thread starter chip2366
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Yes...no problem. Problem comes when you put a "L" into a "H" level as the "L" cannot power electric seats, sunroof etc.
You will need to get the replacement reprogrammed with the security info., engine data etc. from your existing Becm (Cloned)
:behindsofa:
You will need to get the replacement reprogrammed with the security info., engine data etc. from your existing Becm (Cloned)
:behindsofa:
chip2366
Member
- Posts
- 86
- Location
- nottingham
does it have to be done with software
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Yes, it needs someone with the specialised Direct Memory module which firstly allows the electronic lock to be reversed, this in turn allows security and vehicle data to be changed or cloned.
Dealers Test Book cannot do this but there are a few people on here including Rick the Pick and myself who can.
:behindsofa:
Dealers Test Book cannot do this but there are a few people on here including Rick the Pick and myself who can.
:behindsofa:
chip2366
Member
- Posts
- 86
- Location
- nottingham
ok thanks would it be posible with a faultmate mv
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Yes if it is loaded with the Becm CPU software module SM035
