keefa
Member
- Posts
- 54
Hi all,
Changing springs on a 90 Truck cab 300tdi with roll cage, wing kit and 8274 twin motor on front.
All castor corrected QT arms and wide angle props etc.
Procomp ES9000 + 4 shocks all round.
have got the following on at the mo........
BA2101 255 lbs 40mm lift front
BA2102 295lbs 40mm lift Rear
Sits low on the front and seems quite hard. So I'm thinking....
BA2251 175lbs 50mm lift front
BA2252 225lbs 50mm lift rear
Does this seem ok or is the winch gonna sag it down ?
Used 99% off road....
Anyone any thoughts ?
Ta
)
Changing springs on a 90 Truck cab 300tdi with roll cage, wing kit and 8274 twin motor on front.
All castor corrected QT arms and wide angle props etc.
Procomp ES9000 + 4 shocks all round.
have got the following on at the mo........
BA2101 255 lbs 40mm lift front
BA2102 295lbs 40mm lift Rear
Sits low on the front and seems quite hard. So I'm thinking....
BA2251 175lbs 50mm lift front
BA2252 225lbs 50mm lift rear
Does this seem ok or is the winch gonna sag it down ?
Used 99% off road....
Anyone any thoughts ?
Ta
)
