Axles for Rebuild

I plan to build my 90 back onto Galv chassis sometime in the future. when I can afford the chassis.
Gonna try and make a start on some fresh axles to spruce up and rebuild.
Mine is 1990 200Tdi,with classic range rover 10 spline on, discs front and rear. Which axles should I be looking for, got the chance locally of a pair off a discovery 1 N Reg, think they are 24 spline, , would these be OK? or should I be looking for a certain type??
Thanks

they are good if you want 300tdi type axles,which would be my choice,

jamesmartin said:

they are good if you want 300tdi type axles,which would be my choice,

Click to expand...

Thanks James. I'm sure the disco is 300tdi, do the 200tdi s have different axles?

border said:

Thanks James. I'm sure the disco is 300tdi, do the 200tdi s have different axles?

Click to expand...

with a defender they are 10 spline but disco later 200s are 24 ,they are the better axle offering choice of calipers and ali wheels

jamesmartin said:

with a defender they are 10 spline but disco later 200s are 24 ,they are the better axle offering choice of calipers and ali wheels

Click to expand...

Thanks Again, will make sure I get 24 spline.

Gonna have a look at some axles 300tdi, from disco to rebuild. Will I need the radius arms from same vehicle?
Also is there a full kit to rebuild, with everything in balls, bearings, seals ect? or are they separate.
And Should I change anything else such as Stub Axles?
Thanks

border said:

Gonna have a look at some axles 300tdi, from disco to rebuild. Will I need the radius arms from same vehicle?
Also is there a full kit to rebuild, with everything in balls, bearings, seals ect? or are they separate.
And Should I change anything else such as Stub Axles?
Thanks

Click to expand...

only if yours is pre 300 tdi, stub axles only need changing if they are damaged, you never need to remove bottom swivel pin, have a look here
https://www.google.co.uk/url?sa=t&r...ender/&usg=AFQjCNE3c_VPaztC9-gCBOy6gfk6ANaV9w

Thanks James
Think its an N Reg disco, my defender is 200tdi, someone said that my radius arms would not fit, 300 axles,
So aswell as swivel housing kit, I will need wheel bearing kits and all seals ect?

200s will need the wider radius arms to fit disco axles or defender 300 axles
just see what you need when you strip them

jamesmartin said:

200s will need the wider radius arms to fit disco axles or defender 300 axles
just see what you need when you strip them

Click to expand...

Thanks.

The disco is 200tdi.but mate says the axles are definitely 24 spline, so would they be as good as 300tdi or more or less the same??
gonna have a look Wednesday will take photos and post them to make sure before I buy.

border said:

The disco is 200tdi.but mate says the axles are definitely 24 spline, so would they be as good as 300tdi or more or less the same??
gonna have a look Wednesday will take photos and post them to make sure before I buy.

Click to expand...

about the same

jamesmartin said:

about the same

Click to expand...

Thanks James will post photos Wednesday before I decide.

There is no point in this IMO. Stock RRC or D1 10 spline axles are fine for most things. 24 spline have proven to be no stronger real world. And axle strength is only really an issue off road with big tyres. The PCD is the same for all of these axles. So pretty much the same choice of rims.

Photos, Disco is N Reg. Axles 24 spline.
Will these be OK for Defender Rebuild??

Phots again, sorry think the other ones were to big

axles will be perfect with new calipers, discs etc ,plus bonus of wider choice of wheel, i can give you numbers of calipers etc if you need

jamesmartin said:

axles will be perfect with new calipers, discs etc ,plus bonus of wider choice of wheel, i can give you numbers of calipers etc if you need

Click to expand...

Thanks James. Wont be picking them up till next week sometime, but Yes I would like numbers for rebuild parts when you have time.
Thanks Again.