woody13
Active Member
- Posts
- 261
- Location
- Manchester
At the moment I have a 97 disco 300tdi running on 285's and standard axles.I'm going up to 35's soon, so what axle ratio should I be looking at for road use..?
Axle ratio...
- Thread starter woody13
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
haigy
Well-Known Member
- Posts
- 1,277
- Location
- Crewe cheshire
285 are 34 inch and 35s are 34 measured aint they so whats point in changind
woody13
Active Member
- Posts
- 261
- Location
- Manchester
Just an enquiry.
My 285's stand at 32.5", my 35's are just a tad over 34", so a bit of a difference.
I won't know if I need to change the ratios until I fit the 35's and drive on em for a while.
haigy
Well-Known Member
- Posts
- 1,277
- Location
- Crewe cheshire
Id change the transfer box to a 1.4 off a 90. 1.6 off a 110 is to much. But up to you which u av.
woody13
Active Member
- Posts
- 261
- Location
- Manchester
Cheers haigy, I'll look into it.
haigy
Well-Known Member
- Posts
- 1,277
- Location
- Crewe cheshire
No probs mate hope it works for ya. May be inferested in uour 285s at the right price
woody13
Active Member
- Posts
- 261
- Location
- Manchester
I think I've already sold em.If they don't go I'll give you first refusal.
