Auto selector switch

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Grit Valve

2000 4.6 Vouge
Posts
12,465
Location
Plaistow
Afternoon all dse

Been out to day thought I would go in to position 1 no!
Lever goes in fine bit stiff as rarely use 1 and 2, any way goes in but message centre shoes two but when driving I can feel it change from 1 too 2 do it's in there but not showing in dash after a few attempts it shows number 1 haven't looked thro rave yet just wondering is this just common from a lack of use or xswitch playing up or is it just a matter of adjusting the rod/ cable ? Ps have you checked yours lately ? Same in low box
 
Afternoon all dse

Been out to day thought I would go in to position 1 no!
Lever goes in fine bit stiff as rarely use 1 and 2, any way goes in but message centre shoes two but when driving I can feel it change from 1 too 2 do it's in there but not showing in dash after a few attempts it shows number 1 haven't looked thro rave yet just wondering is this just common from a lack of use or xswitch playing up or is it just a matter of adjusting the rod/ cable ? Ps have you checked yours lately ? Same in low box

Possibly down to cable lube i would think. Dirty contacts from not being used. Lube it and excercise it a little that may sort it.
 
Back
Top