Fellow Sufferers,
Has anyone had to change the pipe (part ESR 3921) which runs from the auto box down to the cooler (little one underneath n/s headlight). It's leaking at two points so have ordered a new one. I'm a little bit concerned about the ali thread on the cooler when I undo the steel union on the pipe and also the access when threading the new pipe through. Not to sure if it's the feed or return pipe either so is fluid loss going to be an issue when old one is taken off ? It looks reasonably straight forward to me but I've said that to myself before:doh:
I'm about a three out of ten on the spanners so all advise taken on board.
2.5 TD 2001
Has anyone had to change the pipe (part ESR 3921) which runs from the auto box down to the cooler (little one underneath n/s headlight). It's leaking at two points so have ordered a new one. I'm a little bit concerned about the ali thread on the cooler when I undo the steel union on the pipe and also the access when threading the new pipe through. Not to sure if it's the feed or return pipe either so is fluid loss going to be an issue when old one is taken off ? It looks reasonably straight forward to me but I've said that to myself before:doh:
I'm about a three out of ten on the spanners so all advise taken on board.
2.5 TD 2001
