As a landy owner I would not be without this tool

Leeibberson · May 27, 2012

Hey guys,

Just thought I'd share this with you, as a landy owner removing the props hafts on my defender is a common job for replacing uj's, seals etc. and if many have removed them if you try doing it with 2 9/16" spanners it is a wrist killer and a slow job,

I now have had my britpart prop tool for a while and that is great with a rachet but combine it with this dewalt 10.8v impact gun it makes life easy

ImageUploadedByTapatalk1338073749.318957.jpg

ImageUploadedByTapatalk1338073768.609683.jpg

I recommend this to everyone

Leeibberson · May 27, 2012

Taking prop off with this combination takes - 5 mins

fanatic · May 27, 2012

Are you selling something or a sudden excitement after 7 month of being on forum?

Leeibberson · May 27, 2012

Haha a little bit of excitement I think my longest relationship with a forum ever ;p

I can't give much advice that most don't already know on land rovers so this is my idea of a bit of help as it made my life easier

wack61 · May 27, 2012

£155 :jaw: I'll risk my knuckles

Griffdowg · May 28, 2012

1/2" 12V Impact Wrench Kit 350Nm RAC 038/2364 12 VOLT (5013433012101) | eBay

how about this

Boris113 · May 28, 2012

I've got one of those prop things, it's a really good idea. My mate uses a 9/16 UJ combination socket and reckons that works well also.

Can't go wrong with a 1/2 inch 52mm socket for wheel bearings either...so much better than the box spanners

Landrover Classic Hub Nut Socket 52mm 1/2 Drive | eBay

As a landy owner I would not be without this tool

Leeibberson

New Member

Leeibberson

New Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Leeibberson

New Member

wack61

Well-Known Member

Griffdowg

New Member

Boris113

Well-Known Member

Similar threads