Anyone watching this guy on Youtube?

JimS said:

yes, another 4 years to go before they start being importable

Click to expand...

Yep!!!!!!!!!!!!

Been watching mike a few years as well now, most of his content is very much worth sharing. Fairly sure I picked up on chris higgins vids off of landyzone as well, so it helps to spread the word.

I'd rather which his videos than the latest Top Gear.

oo I like the vortec idea, got a for spares chevy in the garage with the 4.3 v6 wonder if it will fit in the series 3

I’ve been watching his videos too. Very informative.

Hi guys!
Mike here!
Thanks for all your kind words
So swing on by and make a request and I will see what I can do

I do not do drama, music, effects or any other gimmicky stuff

I know I am in Canada and limited to the vehicles I can work on, but I try to cover the stuff that is common for all
The Vortec project is on the back burner for a short while, but it will work - waiting for a special adaptor shaft to be made
The Tee shirts have been a real pain - but I am working on something with a chap in the UK

Cheers!
Making your Land Rover better - one at a time!

https://www.youtube.com/channel/UCRssffMP_F8_SCJcqFLq4Ow

Mike

britrest said:

Hi guys!
Mike here!
Thanks for all your kind words
So swing on by and make a request and I will see what I can do

I do not do drama, music, effects or any other gimmicky stuff

I know I am in Canada and limited to the vehicles I can work on, but I try to cover the stuff that is common for all
The Vortec project is on the back burner for a short while, but it will work - waiting for a special adaptor shaft to be made
The Tee shirts have been a real pain - but I am working on something with a chap in the UK

Cheers!
Making your Land Rover better - one at a time!

https://www.youtube.com/channel/UCRssffMP_F8_SCJcqFLq4Ow

Mike

Click to expand...

Mike do you get any defender td5s to work on dear chap, as I only see the 300tdis and 200s in you’re vids?

Discodevon said:

Mike do you get any defender td5s to work on dear chap, as I only see the 300tdis and 200s in you’re vids?

Click to expand...

Sadly there is only 1 Td5 I know of and that is 200Km away in Montreal
Canadians are quite wary of electronics in Defenders
Mike

britrest said:

Hi guys!
Mike here!
Thanks for all your kind words
So swing on by and make a request and I will see what I can do

I do not do drama, music, effects or any other gimmicky stuff

I know I am in Canada and limited to the vehicles I can work on, but I try to cover the stuff that is common for all
The Vortec project is on the back burner for a short while, but it will work - waiting for a special adaptor shaft to be made
The Tee shirts have been a real pain - but I am working on something with a chap in the UK

Cheers!
Making your Land Rover better - one at a time!

https://www.youtube.com/channel/UCRssffMP_F8_SCJcqFLq4Ow

Mike

Click to expand...

used your clutch master cylinder vid today for pointers on my series 3

Used your swivel replacement vid today to swap out the sweeper seal without dismantling the hub. Bloody hell the flange bolts onto the axle were buggers to get off! The tip on using the upturned wheel to stabilise the hub while it was cleaned and the seal swapped was genius. Cheers.

The guy on tatty car travels is a bit ****. Fancy starting on the handle with your foot..,

If you have a Landy, how could you not watch this guy, he is the Ed China / Ant Anstead of Land Rovers.

Very true, great guy and great vids and as stated no stupid music or anything like that or begging for subscribers on every vid like on some channels, just a shame he doesn’t get td5s there.

I enjoyed watching Mike's videos till he had issues with the D3 and its air suspension. Because he ridiculed the Discovery I un-followed! ha ha

Only joking great viewing

Quite like his truck with the GM engine conversion.