Any kind soul with a SIlI manual please?

Hi All,

It was mentioned here that some of the manuals show measurements from
various points on the chassis and I would like to help a mate who is
rebuilding his first Landy, get the bulkhead back on square?

He noticed when he first drove it home that the doors had different
gaps between the rear of the door and the main tub?

He has replaced one front outrigger back in it's proper place but the
other has been replaced before and not where it should be?

Anyone have any dimensions that might help him get it right please (I
think it's a 109)

All the best ..

T i m

In message <[email protected]>
T i m <[email protected]> wrote:

> Hi All,
>
> It was mentioned here that some of the manuals show measurements from
> various points on the chassis and I would like to help a mate who is
> rebuilding his first Landy, get the bulkhead back on square?
>
> He noticed when he first drove it home that the doors had different
> gaps between the rear of the door and the main tub?
>
> He has replaced one front outrigger back in it's proper place but the
> other has been replaced before and not where it should be?
>
> Anyone have any dimensions that might help him get it right please (I
> think it's a 109)
>
> All the best ..
>
> T i m

On a 109, the fromt face of the bulkhead outrigger is 48.58 inches
from the front of the front spring hangar (measured horizontally)
- it seems......

Richard
--
www.beamends-lrspares.co.uk [email protected]
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Helping keep Land Rovers on and off the road to annoy the Lib Dems

Hi TIm ,

Mail me off list I have the 350 page Land Rover Manual on disk.


andrew"at" preaching.co.uk

You can guess that you take out and put in.

A


"T i m" <[email protected]> wrote in message
news:[email protected]...
> Hi All,
>
> It was mentioned here that some of the manuals show measurements from
> various points on the chassis and I would like to help a mate who is
> rebuilding his first Landy, get the bulkhead back on square?
>
> He noticed when he first drove it home that the doors had different
> gaps between the rear of the door and the main tub?
>
> He has replaced one front outrigger back in it's proper place but the
> other has been replaced before and not where it should be?
>
> Anyone have any dimensions that might help him get it right please (I
> think it's a 109)
>
> All the best ..
>
> T i m

> Hi TIm ,
>
> Mail me off list I have the 350 page Land Rover Manual on disk.
>

Alternatively, as we already know the Series III manual is here ...

http://www.landrover.ee/est/varia/downloads/cars.htm

with the frame dimensions being here...

http://www.landrover.ee/est/files/manuals/cars/sIII/SIII_ROM_Part_6.pdf

There are some minor differences if we are talking about Series II/IIA -
if it's those that you need contact me.

David

On Thu, 30 Sep 2004 19:23:01 +0100, Dougal
<DougalAThiskennel.free-online.co.uk> wrote:

>
>> Hi TIm ,
>>
>> Mail me off list I have the 350 page Land Rover Manual on disk.
>>
>
>Alternatively, as we already know the Series III manual is here ...
>
>http://www.landrover.ee/est/varia/downloads/cars.htm
>
>with the frame dimensions being here...
>
>http://www.landrover.ee/est/files/manuals/cars/sIII/SIII_ROM_Part_6.pdf
>
>There are some minor differences if we are talking about Series II/IIA -
>if it's those that you need contact me.
>
>David

Hi and thanks to all that replied ..

<cough> time to give the broadband a hammering methinks <mutter> ;-)

All the best ..

T i m