Any ideas for taking paint off eyebrows?

W

Wotsit4

New Member

Posts

27

Location

North York's

• Aug 28, 2010

• #1

I would like to get a set of painted Defender 'eyebrows' back to black plastic and wondered if anyone had any ideas that would not damage the plastic, I have tried cellulose thinners and acetone but they had no effect on the paint.

 

meego

Well-Known Member

Posts

10,755

Location

Caledonia

• Aug 28, 2010

• #2

Wotsit4 said:

I would like to get a set of painted Defender 'eyebrows' back to black plastic and wondered if anyone had any ideas that would not damage the plastic, I have tried cellulose thinners and acetone but they had no effect on the paint.

Click to expand...

Try some Nitromores on very small area or back of one. It will bugger up some plastics but not all. I tried it on some bulkhead vent seals and it worked a treat. Worth a try??

 

larrynumber1

New Member

Posts

209

Location

Kildare, Ireland.

• Aug 28, 2010

• #3

try matt or satin black paint, i painted mine and they look grand

 

W

Wotsit4

New Member

Posts

27

Location

North York's

• Aug 28, 2010

• #4

I have some Blackfriars paint remover, I don't know if it is the same as Nitromors but it seems to melt the plastic.
I would have preferred not to have painted them again as I find they don't look good for very long, particularly once they have had a couple of knocks.

 

MrJC

Well-Known Member

Posts

1,241

Location

Near Wigan Lancs. 1997 Defender 110 300tdi

• Aug 28, 2010

• #5

larrynumber1 said:

try matt or satin black paint, i painted mine and they look grand

Click to expand...

I agree with Larry... you could use 'plasticoat' satin or matt finish, its a little flexible and really easy to touch up. I have done my grill and headlight surrounds, look good and stand the winter anyway

 

L

landy90will

Member

Posts

83

• Aug 28, 2010

• #6

yep... your gonna have to shave em off....

 

W

Wotsit4

New Member

Posts

27

Location

North York's

• Aug 28, 2010

• #7

Awww - I thought the Alistair Darling look wasn't that bad!

 

Boris113

Well-Known Member

Posts

1,356

Location

Uppingham, Rutland & Ghana, West Africa

• Aug 28, 2010

• #8

I don't know about the eyebrows but nitromors destroys plastic rad grills...almost seems to melt them.

 

adies_v8

Active Member

Posts

326

Location

Hampshire

• Aug 29, 2010

• #9

Tried most things, in the end i should of painted them up rather then stipping back, just didnt come out well however i tried. In the end just got new ones, there cheap from paddicks.