Freelander 1 Anti rollbars

I recently fitted new lower suspension arms, drop links Caliper carriers, calipers, arb bushes, prop uj's discs, pads and a clutch to my 2005 td4.Now 2 months later my arb has slid to the side and was rubbing the bottom of the strut. I repositioned it and it happened again. I got a new set of arb bushes and fitted them yesterday and the same thing happened yet again.

Any ideas why please. Getting ****ed off now. TIA

Has the anti roll bar still got the rings welded on either side by the rubber D bushes? These are designed to stop it moving but they often rot off.

I replaced mine with some bolt on circular clips. There is a thread with part numbers.

Have a look by the bushes and see if you still have the welded rings. If not that is your problem!!

https://www.landyzone.co.uk/land-rover/anti-roll-bar-retainers.355187/

Found it for you.