Anti Corrosion

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

nitr8

New Member
Posts
36
All,

Does anyone have any recommendations for an anti corrosion product, as well as well as galvanic corrosion?

--me
 
Galvanic corrosion? D'yer mean electrolytic corrosion? If you can separate the steel from the ally put a gasket between the two or blather the whole thing in shutzy type underseal to try an keep the moisture out of the joint.
 
basically what i wanna I was trying to get at is, hopefully if i get my landy tomorrow is what should i do to all rust affected areas (ali/metal) prior painting it.

I know I can paint on top of it but i would prefer preparing it first so it does not just carry on corroding under the paint.

--me
 
Phosphoric acid will kill ally corrosion dead. As it's acid it dissolves the oxides and nitrates and other mineral salts, as soon as it hits good ally it stops as it anodises ally on contact. This can then be painted over without the need for etch primer or other special coatings.

Problem is, how to get hold of Phosphoric acid without resorting to distilling gallons of Coca Cola sugar free...
 
Back
Top