Another brake query

Take5 · May 7, 2008

OK, looking at the RAVE destructions, the 5 bolts that hold the disk to the hub need to come off. What size bolt are they and what fookin head is that on the diagram? Do I need a special tool, and if so can I borrow one - will reward handsomely...

Zeph · May 7, 2008

Hi,

I think they are 14mm spline sockets, they were standard in my little halfords socket set.

Try this link
Replacing a Rear Hub - LR4x4 - The Land Rover Forum

iannotts · May 7, 2008

I used a standard socket (halfrauds pro) and a long bar, there tight. use the wheel to hold the hub

May have to help to socket on to the bolt

Take5 · May 7, 2008

Cheers for that, have some vouchers I can use in Halfrauds...

iannotts · May 7, 2008

shame i cannot rember what size you need of top of my head but 19mm springs to mind.

treat ya self to a new set , only £25 - £30 snigger

Another brake query

Take5

New Member

Zeph

New Member

iannotts

New Member

Take5

New Member

iannotts

New Member

Similar threads