HARRISON 111
New Member
- Posts
- 99
- Location
- ST PAULS CRAY KENT
Hi lads before i change the battery and set the alarm off ! does anyone know how to disable it it maybe something simple like keeping key in the ignition but want to check Thanks
Alarm turn off
- Thread starter HARRISON 111
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tommo138
New Member
- Posts
- 541
- Location
- braintree, essex
i think theres a certain procedure in the owners handbook that tells you how to do it without setting it off, i think you have put the key in the ignition then remove it and then you have something like 17 seconds to disconnect the battery terminals.
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
Turn on ignition to II, then remove battery within 17 seconds of turning the ignition off.
- Posts
- 1,205
- Location
- The Flat lands of Cambridgeshire
Damn
wished i had posted and asked
i changed mine 3 days ago with jump leads hooked to the battery leads to keep power as i dont beliuve i have the eka code for the vehicle
wished i had posted and asked
i changed mine 3 days ago with jump leads hooked to the battery leads to keep power as i dont beliuve i have the eka code for the vehicle
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
YOu can get your EKA code from a main dealer, just take your logbook into the service department, shouldnt cost you a penny.
HARRISON 111
New Member
- Posts
- 99
- Location
- ST PAULS CRAY KENT
Thanks for that lads i knew it was best to check first. I bought a hand book now thanks again
