Alarm / central locking

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

neiltce

New Member
Posts
434
Location
Runcorn
Yet another bit of kit removed from the rangey.

The original alarm was removed from the rangey when it was 3 years old, it was replaced with a toad alarm, which as it turned out didn't like water and was also removed... By a butcher, yes all the wires were hacked off and connector for the alarm removed...

So now I am trying to work out how to get the central locking to work again, I have bought a hawk central locking controller and I am going to fit this but any ideas what wires I need to connect to under the dash, I think one of the control wires is pink...

Also the rear electric windows have an intermittent problem, they work when they feel like it....

Any help appreciated...
 
Lol mine has about 20 wires hanging under the glove box ,

May have to attack it with a test meter and see what happens lol
 
That's why the alarms were taken out, they got wet and fried....

So going to put a hood over this controller to stop the water getting at it
 
I've got rave,

But some of the wiring on it is unclear..

So was looking for a second opinion really, I don't want to cause more problems than I solve...
 
Back
Top