Air Sensor question

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

bedlow

New Member
Posts
6
Backgroud,
Today I had to use a local garage to replace a front left radius arm on my 95 series 1 disco. Upon collection the ABS light will not go out asked the mechanic if he had touched the sensors as I had a simular problem a few years back when I had brakes replaced. Then as it was a Land rover agent they hooked it up and said it was the air sensor and it took a few minits to sort out. Mechanic said he didnt touch them directly but a bit of banging around was done.

My question,
If it is the sensors do they pull out or screw out? after resitting will the ABS light go out automaticly or does it need to be reset by a landrover agent as he doesnt have modern equipment?
thanks in advance
 
hi had to mine for mot,
fr nr side pulled out with mole grips twist/pull then it slid out nice clean off pushed back in then tapped home with hammer and 6" 2x1
drive for 100 yrd s and the pressure pushes senser to correct place job done.
well work for me
hope it do's for you. ( you can find codes on here )
 
Back
Top