Air in brake system

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
C

CRS

Well-Known Member
Posts
432
Just changed the 2 brake pipes to the front brakes on my 79 Range Rover, bleed all the air out and got good pressure on the brake pedal, the problem is when I start the engine the pedal pressure is lost and goes down nearly to the floor, I have tried bleeding with the engine running but no difference. There is no air bubbles coming out now either. Any ideas
Thanks
Chris
 
CRS said:
Just changed the 2 brake pipes to the front brakes on my 79 Range Rover, bleed all the air out and got good pressure on the brake pedal, the problem is when I start the engine the pedal pressure is lost and goes down nearly to the floor, I have tried bleeding with the engine running but no difference. There is no air bubbles coming out now either. Any ideas
Thanks
Chris
Click to expand...
Use the search box top right,there was a member with a similar problem a week or so ago lots of advice was given.
 
You must log in or register to reply here.

Similar threads

Z
P38A Random braking problem-sometimes extremely hard brake pedal
Replies
19
Views
1K
Datatek
Datatek
M
Brakes air in the system
Replies
7
Views
659
MarceloK
M
O
rear brake bleed
Replies
8
Views
964
omlette
O
L
Disco 2 brake question
Replies
5
Views
707
landynutterme
L
MikeFl4
P38A Brake bleeding disaster
Replies
16
Views
2K
MikeFl4
MikeFl4
Back
Top