Hi folks, after fitting my 2 inch lift and my 265/75/16 insa turbos...I want to give it a slightly wider stance, I did consider spacers but I think I'm gonna buy some new modulars but unsure about which offset to get, can anyone point me in the right direction, thanks
Disco 1 Advice please
- Thread starter scoots
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 23,051
- Location
- In the next Glen
-32 offset but you will need extended arches & they will sit flush with them. If they stick out
its an mot fail although they dont seam to bother with that here, could just play dumb.
its an mot fail although they dont seam to bother with that here, could just play dumb.
Dorsetlanez
Active Member
- Posts
- 109
- Location
- Ringwood
-32 is the way to go - however there are none in stock anywhere at the moment! only +25mm
Dorsetlanez
Active Member
- Posts
- 109
- Location
- Ringwood
Just one thing if you do go with an offset of 32mm you will need the wheelarch extension kit. Have just had to order this for mine
Dorsetlanez
Active Member
- Posts
- 109
- Location
- Ringwood
Im not cutting the arches on mine, just extending them with a set of extended arches. However i do have a winch bumper which sits a lot higher than the the standard bumper - the back arches are fine though.
