parptoot
Well-Known Member
- Posts
- 476
- Location
- South Northamptonshire
Hmmm, that was a few weeks ago and I'm old so I'd have to dig out the invoice. Certainly over £100 though.
Additional rear heater pics
- Thread starter Garybaker
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hmmm, that was a few weeks ago and I'm old so I'd have to dig out the invoice. Certainly over £100 though.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 64,122
- Location
- Gloucestercotshirewolds
I've used a 300w ceramic heater in the past wired to aux battery.....more wishful thinking than actual heat output though.
In my Series 3 ambulance there's a large matrix (twice the size compared to standard) mounted in the back with the blower over the cab door. The pipework t's off the normal matrix pipework, under the bulkhead and along under the floor.
It works really well and as there's no noticable drop in temp from the (bit pathetic) cab heater with the 2nd heater blowing I've come to the conclusion that lack of hot coolant isn't the issue but matrix size.
It's also rigged to work as a cool air blower with vents in the rear bulkhead before the matrix but I don't imagine needing that function often so I'll remove the ducting from the intake vent to blower so it'll draw pre-warmed air from the cab rather than from outside.
Mmmmm....toasty
In my Series 3 ambulance there's a large matrix (twice the size compared to standard) mounted in the back with the blower over the cab door. The pipework t's off the normal matrix pipework, under the bulkhead and along under the floor.
It works really well and as there's no noticable drop in temp from the (bit pathetic) cab heater with the 2nd heater blowing I've come to the conclusion that lack of hot coolant isn't the issue but matrix size.
It's also rigged to work as a cool air blower with vents in the rear bulkhead before the matrix but I don't imagine needing that function often so I'll remove the ducting from the intake vent to blower so it'll draw pre-warmed air from the cab rather than from outside.
Mmmmm....toasty
Similar threads
