Acid etch primer

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Discodevon

Discodevon

Well-Known Member
Posts
1,454
Hi guys hope you are all enjoying the last of the summer! I’m looking to repaint the rear floor on my landy 110 van as some of the paint has come off and looks grubby, just wondering can anyone recommend a good acid etch primer which doesn’t react with the paint as I don’t want to have to get it all back to bare metal, as I understand some etch primers don’t bond well with existing paint?

Worth a shot

Thanks in advance
 
I've been using autotek etch primer on Ali with good results .... and I know that @bankz5152 has done quite a bit of paintwork on his deafener too ;)

As for the weather - it's been bl@@dy awful today - raining cats and dogs all flippin day !! Summer ? Pah! not up here :rolleyes: :D
 
I used a tin of u-pol from halfords as I needed a can last sunday it didn't react with the paint......
IMG_2013.JPG

IMG_2104.JPG
IMG_2107.JPG
 
BuzzLand said:
How easy was it to remove the checker-plating? Mine is riveted into place.
Click to expand...

Just drill the heads off the rivets & pull the plating off unless the last owner has used Sikaflex or the likes to seal it
then youl need to run a sharp knife ie Stanley, between the plating & panel then just punch out the remaining part
of the rivet in the panel.;)
 
You must log in or register to reply here.

Similar threads

R
A question of colour and mixing….
Replies
7
Views
1K
resto_d1
R
Inner Farmer
Series 3 floor boards
Replies
0
Views
541
Inner Farmer
Inner Farmer
Inner Farmer
Series 3 floor boards
Replies
7
Views
1K
Inner Farmer
Inner Farmer
R
Garage lift options and lift safety
2
Replies
20
Views
2K
Ian M in France
Ian M in France
R
Tricky electrickery on the old pig
Replies
18
Views
1K
resto_d1
R
Back
Top