Discokids
Well-Known Member
- Posts
- 3,160
- Location
- Derbyshire
That's a nice pile aaron, care to share the cost of getting that lot done? (Sorry if you already have)
Aaron's 90 rebuild round 4
- Thread starter aaronmorris
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Colonial
Well-Known Member
- Posts
- 1,024
- Location
- Shrewsbury
Aaron. It looks like my kitchen sieve. What next?
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Don't think I've said bud, £175, just glad most things have come back without massive holes in them
Yes, certainly the worst I've seen in person, what next? Hopefully I can repair it, and then send it for galv
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Well I best pull my finger out, just had a phone call that I was not expecting in the slightest! Richards' chassis have just rang me to say it is ready to collect
Not even got a rear axle yet, or an engine, gearbox, transfer box... oh or a way to collect it I may end up having to rent a trailer.
Not even got a rear axle yet, or an engine, gearbox, transfer box... oh or a way to collect it
I may end up having to rent a trailer.
Discokids
Well-Known Member
- Posts
- 3,160
- Location
- Derbyshire
I bought a caravan chassis off ebay, one of the modern ones that un-bolts, for £100 and it's pretty useful for stuff like this, easier to store if you can be bothered to take it to bits.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
That's a good idea actually, makes a cheap trailer which is always handy to have.
Have looked at buying a trailer in the past, but it's having somewhere to keep it, I already have too much crap and no where to put it
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Got the last few bits back from blasting today.
Cappings, bonnets frames.
.
And also bought a bulkhead, Oops..
Don't really know why, more of an impulse buy, but came up locally and thought bugger it I'll have it. Mind you I had agreed to buy it before I knew about the chassis coming or I might not have bothered, spend, spend bloody spend this week..
It is off a tdci, (so I would loose the air con) but a few people have managed to fit the old dash into them, so I plan to do some converting and it'll come in for another project, for the time being, it'll probably sit in the shed for another 6 months.
Cappings, bonnets frames.
.And also bought a bulkhead, Oops..
Don't really know why, more of an impulse buy, but came up locally and thought bugger it I'll have it. Mind you I had agreed to buy it before I knew about the chassis coming or I might not have bothered, spend, spend bloody spend this week..
It is off a tdci, (so I would loose the air con
) but a few people have managed to fit the old dash into them, so I plan to do some converting and it'll come in for another project, for the time being, it'll probably sit in the shed for another 6 months.
Last edited:
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Same here, has been 6 weeks since I ordered it and they told me 10-12 weeks.
But last time they told me 10 weeks it was 12 or 13 so wasn't expecting for a while.
So happy days here too, and may see you their Saturday.
Jam1
Well-Known Member
- Posts
- 1,315
- Location
- Staffordshire
Well if you are both going to the same place at the same time maybe you could combine the transport and split the costs
But as always I bet you both live in opposite directions
But as always I bet you both live in opposite directions
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
When we collected the chassis for the 2a my sons g/friend's dad collected it with his scaffolding truck ( his own business ) and when he arrived there he chipped them down £300 for waiting 3 extra weeksWell if you are both going to the same place at the same time maybe you could combine the transport and split the costs
But as always I bet you both live in opposite directions
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Tell me to **** off and mind my own if you want, but have you had the OK from them about a 10:30 pick up?
Generally the owner only goes in on a Saturday and wants people their early so he can go home and spend the rest of his day as he wishes.
I have been told to be their between 8-9am, as I have done the other few times I have been for collections also.
James_mac
Active Member
- Posts
- 264
- Location
- Leeds & Yeovil
You can you my trailer if you need mate
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Well went and picked the chassis up this morning, happy days
Slight cock up with paper work, (not their) but we got their in the end.
Slight cock up with paper work, (not their) but we got their in the end.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Oh blimey Aaron,
You need to take that back mate............
They have given you an Australian chassis.
Still looks nice
Now all you got to do is get the rest of it done, LOL. looking forward to the next build,
Cheers
You need to take that back mate............
They have given you an Australian chassis.
Still looks nice
Now all you got to do is get the rest of it done, LOL. looking forward to the next build,
Cheers
- Posts
- 11,020
- Location
- North of the Wall
It's a good day when the chassis arrives
Did you hire transport in the end?
Did you hire transport in the end?
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Haha, cheers, just the start, and the weather will be against me shortly
It's a good day when the chassis arrives
Did you hire transport in the end?
Indeed
Just a shame I'm not really ready for it.And I did, I ended up borrowing a trailer from a friend of a friend.
